-
ANDRY – Pulley
A light-duty steel pulley designed to be used for tensioning safety nets. For use with ropes up to 12 mm in diameter. Efficiency: 70%. Carbon steel body and axle, polyamide wheel.
-
BLIN KIT – Fall arrester Kit
A closed-system fall arrest kit designed to deliver maximum safety and performance. Suitable for both vertical and horizontal/inclined use (also certified for use over sharp edges r>= 0.5mm). The fall arrest device cannot be removed from the rope to help prevent installation errors. The innovative cam creates smooth action on the rope whether it is being used to ascend or descend the line. Performance on vertical lines can be further increased by using the Rope Surfer on the connection lanyards.
-
Blin Kit spare rope
Spare rope kits for the Blin Kit. For replacement, cut the old rope and remove from the device, then insert the new rope into the device in the correct direction. Then tie an end knot on the lower end and apply the thermoshrink wrap supplied with the kit.
-
CABLE FALL ARRESTER – Cable fall arrester
Auto-locking fall arrester for use on 8 mm diameter stainless steel 7×19 cable. The device will trail the user during ascension and lock automatically in the event of a fall. Must be used in combination with an EN 355 certified energy absorber (ref.102901).
-
CABLE FALL ARRESTER KIT – Cable fall arrester kit
Cable Fall Arrester (ref.1317) equipped with an EN 355 certified shock absorber (ref.102901) and two steel connectors (ref.0981). For use on 8 mm diameter stainless steel 7×19 cable.
-
CABLE LADDER 10 m – Ladder
10 meter steel cable ladder with 33 steps. Constructed from 3 mm galvanized steel cable with a breaking strength of 8.5 kN. Distance between each step is 30 cm. Step width is 13 cm.
-
COBRA 10 – Retractable fall arrester
Self-retracting fall arrester with a cable length of 10 m. Also certified for horizontal/incline use with the additional external energy absorber. 4.8 mm galvanized steel cable with a breaking strength of 12 kN is protected by a durable ABS cover. Complete with auto-locking swivel connector and internal mechanical energy absorbing system.
-
COBRA 15 – Retractable fall arrester
Self-retracting fall arrester with a cable length of 15 m. Also certified for horizontal/incline use if used in combination with an energy absorbing lanyard (ref. 5030101). 4 mm galvanized steel cable with a breaking strength of 12 kN is protected by a durable ABS cover. Complete with auto-locking swivel connector and internal mechanical energy absorbing system.
-
COBRA 15 – Retractable fall arrester
Self-retracting fall arrester with a cable length of 15 m. Also certified for horizontal/incline use with the additional external energy absorber. 4.8 mm galvanized steel cable with a breaking strength of 12 kN is protected by a durable ABS cover. Complete with auto-locking swivel connector and internal mechanical energy absorbing system.
-
COBRA 2 – Retractable fall arrester
Self-retracting fall arrester certified for use overhead or at foot level with fall factor up to 2. Maximum length of 165 cm without connectors (200 cm is the maximum allowed length with connectors). 46 mm polyester webbing with a breaking strength of 15 kN is protected by a durable ABS cover. Complete with locking steel connector and integrated shock absorber.
-
COBRA 30 – Retractable fall arrester
Self-retracting fall arrester with a cable length of 30 m. Also certified for horizontal/incline use with the additional external energy absorber. 4.8 mm galvanized steel cable with a breaking strength of 12 kN is protected by a durable ABS cover. Complete with auto-locking swivel connector and internal mechanical energy absorbing system.
-
COBRA 20 – Retractable fall arrester
Self-retracting fall arrester with a cable length of 20 m. Also certified for horizontal/incline use with the additional external energy absorber. 4.8 mm galvanized steel cable with a breaking strength of 12 kN is protected by a durable ABS cover. Complete with auto-locking swivel connector and internal mechanical energy absorbing system.