OTTO STANDARD – Descender
One of the lightest figure eights on the market, our Standard Figure Eight offers a smooth rappel with minimal impact on the rope. The secret to rappelling on a figure eight without twisting the rope is to always feed the rope from directly below—never hold the rope off to the side or at an angle.
Ref. | Product name | Weight | Rope diameter min | Rope diameter max | |||
g | oz | mm | in | mm | in | ||
092801 | OTTO STANDARD | 110 | 3.9 | 8 | 0.31 | 13 | 0.51 |
Related Products
-
DRYAD PRO – Pulley
Compact double pulley for block-and-tackle systems. Main attachment point accommodates two carabiners and the becket features a bottom attachment point for linking components in a block-and-tackle system. For use with ropes up to 13 mm. Prusik minding, the self-locking knot can be installed on both sides of both wheels. Sealed ball bearings for high efficiency and intensive use at high speed. Efficiency: 92%. Aluminum alloy body and wheels, stainless steel axle.
-
WING, WING 2 CAPS
Two bolt-on replacement caps prevent accidental entanglement from clothing and hair and carry backup lines along with the pulley.
-
TURBOLOOP – Foot loop
Foot loop for use in rope ascent. Steel buckle allows for quick adjustment from 95 to 150 cm. Also features a tensioning strap to secure the foot and a reinforced main attachment point.
-
TURBOCHEST – Chest ascender
A revolutionary chest ascender that features two proprietary rollers for a smooth interface with the rope. This not only helps with climbing efficiency by making the upward glide much smoother. It also reduces dangerous wear on the device where the rope tends to rub on the body of a traditional ascender. The perfectly profiled closure keeps the rope in line with the body of the device and the rollers to prevent the rope from escaping the device during tight pendulums and traverses. The toothed cam is finished with a special anti-wear treatment and features drain holes to help prevent the…