FLYTE – Pulley
Linear double pulley with stainless steel wheels. Sealed ball bearings for low friction and increased speed. Specifically conceived for crossing cables and zip lines.
Accommodates ropes up to 13 mm and steel cables up to 12 mm in diameter.
Large main attachment hole and secondary attachment point on top.
Working load limit: 10 kN
Breaking load: 20 kN
| Ref. | Product name | Weight | Inner sheave diameter | Rope diameter Max | Cable diameter Max | Working load Max | Breaking load | Ball bearings | Sheave material |  |
|||
| g | oz | mm | mm | mm | kN | LBF | kN | LBF | EN 12278 | ||||
| 3121 | FLYTE | 280 | 9.9 | 21 | 13 | 12 | 10 kN | 2248 LBF | 20 | 4497 | • | Stainless steel | • |
Related Products
-
TURBOHAND GUIDE – Accessory for ascender
A stainless steel rope guide that can be attached with two screws to the bottom of the Turbohand ascender to align the rope for long ascents. It also reinforces the main attachment point for increased resistance to wear and tear and prevents the carabiner from interfering with the rope.
-
TURBOHAND – Hand ascender
The Turbohand ascender uses proprietary technology and cutting edge design to make climbing ropes safer, faster and easier. It features a proprietary roller. Which not only helps with climbing efficiency by making the upward glide much smoother, it also reduces dangerous wear and tear on the device where the rope tends to rub on the body of a traditional ascender. The ergonomic rubber handle extends into the upper part of the spine to allow for a double-handed grip. The handle and the rope are aligned on the same plane for the best handling and efficiency. Features three large attachment points,…
-
TURBOCHEST BLACK – Chest ascender
A revolutionary chest ascender that features two proprietary rollers for a smooth interface with the rope. This not only helps with climbing efficiency by making the upward glide much smoother. It also reduces dangerous wear and tear on the device where the rope tends to rub on the body of a traditional ascender. The perfectly profiled closure keeps the rope in line with the body of the device and the rollers to prevent the rope from escaping the device during tight pendulums and traverses. Self-cleaning holes on both the body and the cam help prevent the build up of grit…
-
SPHINX – Pulley
An ultra slim, highly functional fixed pulley. The main attachment point allows for full rotation of the carabiner. For use with ropes up to 13 mm. Prusik minding, the self-locking knot can be installed on one side. Self-lubricated bushings are sufficient for light applications at low speed. Efficiency: 80%. Aluminum alloy body and wheel, stainless steel axle.