COBRA 20 – Retractable fall arrester
Self-retracting fall arrester with a cable length of 20 m. Also certified for horizontal/incline use with the additional external energy absorber. 4.8 mm galvanized steel cable with a breaking strength of 12 kN is protected by a durable ABS cover. Complete with auto-locking swivel connector and internal mechanical energy absorbing system.
| New | Ref. | Product name | Weight |  |
 |
 |
|
| g | oz | PPE-R/11.060 | |||||
 |
3139 | COBRA 20 m | 9800 | 345.9 | EN 360 | • | • |
Related Products
-
TURBOHAND – Hand ascender
The Turbohand ascender uses proprietary technology and cutting edge design to make climbing ropes safer, faster and easier. It features a proprietary roller. Which not only helps with climbing efficiency by making the upward glide much smoother, it also reduces dangerous wear and tear on the device where the rope tends to rub on the body of a traditional ascender. The ergonomic rubber handle extends into the upper part of the spine to allow for a double-handed grip. The handle and the rope are aligned on the same plane for the best handling and efficiency. Features three large attachment points,…
-
TETHYS – Pulley
A compact and lightweight pulley with rotating flanges and a large attachment point that accommodates two carabiners. For use with ropes up to 13 mm. Prusik minding, the self-locking knot can be installed on both sides. Self-lubricated bushings are sufficient for light applications at low speed. Efficiency: 80%. Aluminum alloy body and wheel, stainless steel axle.
-
TURBOLOOP – Foot loop
Foot loop for use in rope ascent. Steel buckle allows for quick adjustment from 95 to 150 cm. Also features a tensioning strap to secure the foot and a reinforced main attachment point.
-
TURBOCHEST BLACK – Chest ascender
A revolutionary chest ascender that features two proprietary rollers for a smooth interface with the rope. This not only helps with climbing efficiency by making the upward glide much smoother. It also reduces dangerous wear and tear on the device where the rope tends to rub on the body of a traditional ascender. The perfectly profiled closure keeps the rope in line with the body of the device and the rollers to prevent the rope from escaping the device during tight pendulums and traverses. Self-cleaning holes on both the body and the cam help prevent the build up of grit…