ANDRY – Pulley
A light-duty steel pulley designed to be used for tensioning safety nets.
For use with ropes up to 12 mm in diameter.
Efficiency: 70%.
Carbon steel body and axle, polyamide wheel.
| Ref. | Product name | Weight | Inner sheave diameter | Rope diameter Max | Working load Max | Breaking load | Sheave material |  |
|||
| g | oz | mm | mm | kN | LBF | kN | LBF | EN 12278 | |||
| 0108 | ANDRY | 100 | 3.5 | 26 | 12 | 1,5 kN x 2 = 3 kN | 337 LBF x 2 = 674 LBF | 22 | 4946 | Polyamide | • |
Related Products
-
SPHINX – Pulley
An ultra slim, highly functional fixed pulley. The main attachment point allows for full rotation of the carabiner. For use with ropes up to 13 mm. Prusik minding, the self-locking knot can be installed on one side. Self-lubricated bushings are sufficient for light applications at low speed. Efficiency: 80%. Aluminum alloy body and wheel, stainless steel axle.
-
TURBOHAND GUIDE – Accessory for ascender
A stainless steel rope guide that can be attached with two screws to the bottom of the Turbohand ascender to align the rope for long ascents. It also reinforces the main attachment point for increased resistance to wear and tear and prevents the carabiner from interfering with the rope.
-
TURBOHAND – Hand ascender
The Turbohand ascender uses proprietary technology and cutting edge design to make climbing ropes safer, faster and easier. It features a proprietary roller. Which not only helps with climbing efficiency by making the upward glide much smoother, it also reduces dangerous wear and tear on the device where the rope tends to rub on the body of a traditional ascender. The ergonomic rubber handle extends into the upper part of the spine to allow for a double-handed grip. The handle and the rope are aligned on the same plane for the best handling and efficiency. Features three large attachment points,…
-
DRUID – Descender
A lightweight, compact auto-braking descender for rope access and rescue designed for semi-static ropes ranging from 10-11 mm. Proprietary anti-panic function in the lever re-engages the cam if the handle is pulled too far where it could lead to unsafe descent speeds. The body and lever are made of robust hot-forged aluminum alloy. Mechanical parts are made of precision-cast stainless steel. The internal mechanism and locking cam use a patented design for smooth action on the rope which prevents rapid wear-and-tear and absorbs energy from small shocks with a slight amount of rope slippage. The fluid action on the rope…