รอกพกพาแบบล็อคอัตโนมัติ Turbolock
ACTIVITIES
| Ref. | Product name | Weight | Inner sheave diameter | Rope diameter Min | Rope diameter Max | Working load Max | Breaking load | Ball bearings | Sheave material |  |
|
|
 |
||||
| g | oz | mm | mm | mm | kN | LBF | kN | LBF | EN 12278 | EN 567 | EN 12841/B | ||||||
| 3185 | TURBOLOCK | 198 | 7.0 | 41 | 8 | 13 | 2.5 kN x 2 = 5 kN | 562 LBF x 2 = 1124 LBF | 23 | 5620 | • | Aluminum alloy | • | • | • | • | |
The Turbolock is a progress capture pulley designed to be exceptionally compact, robust and efficient.
Specifically contoured for operation with one hand. The locking mechanism for opening and closing allows the rope to be inserted without removing the device from the anchor and it cannot be opened when the pulley is loaded to prevent accidental openings during use.
Toothed cam is designed for an immediate and strong grab on ropes from 8 to 13 mm.
The cam is enabled and disabled with a switch that is protected inside the flanges to prevent accidental activations. One movement to open the cam for easier insertion or removal of the rope or to use the device as a non-locking simple pulley. Two movements to enable the cam.
The two attachment points (main attachment point and the becket hole) allow for the rotation of carabiners for maximum ease of use.
Large diameter sheave with sealed ball bearings for very high efficiency (95%).
Robust construction features hot forged side plates, precision milled aluminum alloy sheave, and stainless steel cam, rivets and pins.
Related Products
-
TETHYS – Pulley
A compact and lightweight pulley with rotating flanges and a large attachment point that accommodates two carabiners. For use with ropes up to 13 mm. Prusik minding, the self-locking knot can be installed on both sides. Self-lubricated bushings are sufficient for light applications at low speed. Efficiency: 80%. Aluminum alloy body and wheel, stainless steel axle.
-
SOLO 2 – Rope clamp
A hyperlight compact ascender with an ergonomic design that makes it very easy to use. Perfect for ascension, verified for traversing, and can also be used in block-and-tackle systems. The lower hole is shaped for optimal positioning of the carabiner while the upper hole fits a safety carabiner to secure the rope. The toothed cam is finished with a special anti-wear treatment and features drain holes to help prevent the build up of mud and grit. The opening mechanism is simple and secure with the ability to lock the device open for easier attachment and a removable pull cord that…
-
CABLE LADDER 10 m – Ladder
10 meter steel cable ladder with 33 steps. Constructed from 3 mm galvanized steel cable with a breaking strength of 8.5 kN. Distance between each step is 30 cm. Step width is 13 cm.
-
TARZAN REWIND – Lanyard
Webbing lanyards with rewind elastic keep straps tight and out of the way when not in use Features two extra central loops for fixing a traveling pulley A special version of the Jungle Rewind Lanyard with a central sling that has two attachment loops for fixing a traveling pulley. The lanyards are constructed from special rewind webbing designed to retract the lanyards to 45 cm when not in use keeping them tight to the body and out of the way. The twist ring attachment point optimally positions the lanyards when attached through the tie-in points on traditional harnesses. Not rated…