-
ANDRY – Pulley
A light-duty steel pulley designed to be used for tensioning safety nets. For use with ropes up to 12 mm in diameter. Efficiency: 70%. Carbon steel body and axle, polyamide wheel.
-
BASIC 9 mm – Lanyard
9 mm dynamic rope construction naturally absorbs energy Double lanyard constructed from 9 mm dynamic rope naturally absorbs energy in the event of a fall. Large nylon sleeves at the carabiner attachment points keep biners situated in their correct orientation and protect the stitch points from wear and tear. A transparent nylon sleeve protects the bar tack at the main attachment point as well. Not rated for use in via ferrata.
-
CABLE LADDER 10 m – Ladder
10 meter steel cable ladder with 33 steps. Constructed from 3 mm galvanized steel cable with a breaking strength of 8.5 kN. Distance between each step is 30 cm. Step width is 13 cm.
-
DRYAD – Pulley
Compact double pulley for block-and-tackle systems. Main attachment point accommodates two carabiners and the becket features a bottom attachment point for linking components in a block-and-tackle system. For use with ropes up to 13 mm. Prusik minding, the self-locking knot can be installed on both sides of both wheels. Self-lubricated brass bushings are sufficient for light applications at low speed. Efficiency: 80%. Aluminum alloy body and wheels, stainless steel axle.
-
DRYAD PRO – Pulley
Compact double pulley for block-and-tackle systems. Main attachment point accommodates two carabiners and the becket features a bottom attachment point for linking components in a block-and-tackle system. For use with ropes up to 13 mm. Prusik minding, the self-locking knot can be installed on both sides of both wheels. Sealed ball bearings for high efficiency and intensive use at high speed. Efficiency: 92%. Aluminum alloy body and wheels, stainless steel axle.
-
JANUS – Pulley
A high strength multifunctional double pulley for block-and-tackle systems and complex operations. Features large wheels, a main attachment point that accommodates three carabiners, and a large becket with a large bottom attachment point and two secondary attachment points on the sides for linking, positioning and attaching progress capture systems. For use with ropes up to 16 mm. Prusik minding, the self-locking knot can be installed on both sides of both wheels. Self-lubricated bushings are sufficient for light applications at low speed. Efficiency: 90%. Aluminum alloy body and wheels, stainless steel axle.
-
JANUS PRO – Pulley
A high strength multifunctional double pulley for block-and-tackle systems and complex operations. Features large wheels, a main attachment point that accommodates three carabiners, and a large becket with a large bottom attachment point and two secondary attachment points on the sides for linking, positioning and attaching progress capture systems. For use with ropes up to 16 mm. Prusik minding, the self-locking knot can be installed on both sides of both wheels. Sealed ball bearings for high efficiency and intensive use at high speed. Efficiency: 97%. Aluminum alloy body and wheels, stainless steel axle.
-
JUNGLE – Lanyard
Constructed from 23 mm semi-static webbing Double lanyard constructed from 23 mm semi-static webbing. The twist ring attachment point optimally positions the lanyards when attached through the tie-in points on traditional harnesses. Not rated for use in via ferrata.
-
JUNGLE REWIND – Lanyard
Webbing lanyards with rewind elastic keep straps tight and out of the way when not in use Double lanyard constructed from special rewind webbing designed to retract the lanyards to 45 cm when not in use keeping them tight to the body and out of the way. The twist ring attachment point optimally positions the lanyards when attached through the tie-in points on traditional harnesses. Not rated for use in via ferrata.
-
JUNGLE SINGLE – Lanyard
Constructed from 23 mm semi-static webbing Single lanyard constructed from 23 mm semi-static webbing with a twist ring attachment point that optimally positions the lanyard when attached through the tie-in points on traditional harnesses. Use a 10 mm quick link to fix it to the Wing Traveling Pulley for fast and secure attachments. Not rated for use in via ferrata.
-
LADDER AIDER
10 steps with an aluminum spreader bar at the top to hold them open 1” (25 mm) flat webbing for comfort and durability Two full-strength handle/clip-in loops Veteran wall climbers know that the old-style alternating-step aiders tend to twist and tangle in the wind. Ladder Aiders eliminate this nuisance and are easier to use with big boots. A full 6-feet long, these are taller than many aiders for maximum efficiency.
-
LIFT – Rope clamp
Compact rope clamp with a toothless cam for gentle action on the rope. Flanges and cam constructed from aluminum alloy. Standards: – EN 12841/B for semi-static ropes ranging from 10 to 13 mm. – EN 567 for semi-static and dynamic ropes ranging from 8 to 13 mm