BLIN KIT – Fall arrester Kit
A closed-system fall arrest kit designed to deliver maximum safety and performance. Suitable for both vertical and horizontal/inclined use (also certified for use over sharp edges r>= 0.5mm).
The fall arrest device cannot be removed from the rope to help prevent installation errors.
The innovative cam creates smooth action on the rope whether it is being used to ascend or descend the line. Performance on vertical lines can be further increased by using the Rope Surfer on the connection lanyards.
Wear and tear on the rope is reduced to the minimum thanks to the specially designed locking mechanism that lowers the force transferred to the body in the event of a fall and locks the rope along a long axis, rather than pinching it aggressively with a toothed cam.
Hot forged stainless steel locking components combine with a robust aluminum alloy body for exceptional durability over time.
Pre-equipped with robust Iridium 10.5 mm semi-static rope with stitched loops on the ends. Available in a variety of lengths. Replacement rope kits are available.
Available with three connections:
– steel oval locking carabiner;
– 26 cm webbing lanyard (total length 42 cm, including the carabiner and the quick link);
– 40 cm webbing lanyard (total length 56 cm, including the carabiner and the quick link).
Certified for a maximum user weight of 120 kg (for vertical use) or 100 kg (for horizontal/inclined use).
| Ref. | Product name | Weight | Breaking load | Rope diameter min | Rope diameter max |  |
 |
 |
|
| g | oz | kN | mm | mm | CNB/P/11.075 | ||||
| 256501 | BLIN KIT 10 m + 0981 | 1110 | 39.2 | 15 | 10,5 | 10,5 | EN 353-2 | • | • |
| 256502 | BLIN KIT 20 m + 0981 | 1820 | 64.2 | 15 | 10,5 | 10,5 | EN 353-2 | • | • |
| 256503 | BLIN KIT 10 m + 0934 + 2030026F + 0981 | 1240 | 43.8 | 15 | 10,5 | 10,5 | EN 353-2 | • | • |
| 256504 | BLIN KIT 20 m + 0934 + 2030026F + 0981 | 1950 | 68.8 | 15 | 10,5 | 10,5 | EN 353-2 | • | • |
| 256505 | BLIN KIT 10 m + 0934 + 2030040F + 0981 | 1250 | 44.1 | 15 | 10,5 | 10,5 | EN 353-2 | • | • |
| 256506 | BLIN KIT 20 m + 0934 + 2030040F + 0981 | 1960 | 69.2 | 15 | 10,5 | 10,5 | EN 353-2 | • | • |
Related Products
-
TURBOFOOT – Foot ascender
Proprietary rollers increase climbing efficiency and decrease wear and tear on the device and ropes Innovative straps provide a secure and ergonomic fit on boots Can be rigged as a locking pulley for light hauling (max load 50 kg, 110 lbs) For ropes from 8 to 13 mm Available in right and left versions
-
SPHINX PRO – Pulley
An ultra slim, highly functional fixed pulley. The main attachment point allows for full rotation of the carabiner. For use with ropes up to 13 mm. Prusik minding, the self-locking knot can be installed on one side. Sealed ball bearings for high efficiency and intensive use at high speed. Efficiency: 92%. Aluminum alloy body and wheel, stainless steel axle.
-
TURBOHAND – Hand ascender
The Turbohand ascender uses proprietary technology and cutting edge design to make climbing ropes safer, faster and easier. It features a proprietary roller. Which not only helps with climbing efficiency by making the upward glide much smoother, it also reduces dangerous wear and tear on the device where the rope tends to rub on the body of a traditional ascender. The ergonomic rubber handle extends into the upper part of the spine to allow for a double-handed grip. The handle and the rope are aligned on the same plane for the best handling and efficiency. Features three large attachment points,…
-
TURBOHAND PRO – Hand ascender
The Turbohand Pro ascender is the absolute top of the line for maximizing efficiency while ascending ropes. It features a proprietary roller. Which not only helps with climbing efficiency by making the upward glide much smoother, it also reduces dangerous wear and tear on the device where the rope tends to rub on the body of a traditional ascender. The removable rope guide at the bottom of the handle optimally aligns the rope for long ascents.