ชุดอุปกรณ์โรยตัวหนีไฟ DRUID PRO FIRE 20เมตร
320201
ACTIVITIES
| New | Ref. | Product name | Weight | Breaking load | Rope diameter min | Rope diameter max |  |
|
|
|
STANDARD | |
| g | oz | kN | mm | mm | EN 12841/C | EN 358 | EN 353-2 | EN 795-B | EN 341/2A | |||
| • | 320201 | DRUID PRO FIRE 20 m + 2125 + 0995 + BAG | 2400 | 84.7 | 15 | 11 | 11 | • | • | • | • | • |
| • | 320202 | DRUID PRO FIRE 20 m + 2125 + 0995 – NO BAG – | 2020 | 71.3 | 15 | 11 | 11 | • | • | • | • | • |
The descent line is the Blazer 11 mm rope with a para-aramid material sheath that allows for use up to 350°C (melting temperature > 450°C).
The locking cam system uses an innovative design for smooth action on the rope and the absorption of energy from small shocks and dynamic loads with a slight amount of rope slippage. Adjustment is simple and intuitive. To reduce length, simply pull the rope through the device. To increase length, use the trigger for limited tension situations or the lever when the rope is completely loaded.
Multiple certifications for a wide variety of uses: EN 341/2A emergency evacuation device, EN 12841/C rope access descender, EN 353-2 fall arrester, EN 358 work positioning lanyard, EN 795/B anchoring device.
The rope is removable and replaceable.
Also available with the fire resistant transport bag that can be connected to the specific loops of the FRX harness.
Related Products
-
TURBOCHEST BLACK – Chest ascender
A revolutionary chest ascender that features two proprietary rollers for a smooth interface with the rope. This not only helps with climbing efficiency by making the upward glide much smoother. It also reduces dangerous wear and tear on the device where the rope tends to rub on the body of a traditional ascender. The perfectly profiled closure keeps the rope in line with the body of the device and the rollers to prevent the rope from escaping the device during tight pendulums and traverses. Self-cleaning holes on both the body and the cam help prevent the build up of grit…
-
TURBOHAND GUIDE – Accessory for ascender
A stainless steel rope guide that can be attached with two screws to the bottom of the Turbohand ascender to align the rope for long ascents. It also reinforces the main attachment point for increased resistance to wear and tear and prevents the carabiner from interfering with the rope.
-
TURBOKNEE SYSTEM – Knee ascender
Incredibly efficient knee ascender system for SRT tree climbing. Equipped with the Turbochest rope clamp that features two proprietary rollers that help with climbing efficiency by making the upward glide much smoother. The foot-loop is made from robust 4 mm cord and is fully adjustable in length. The high-quality bungee cord delivers immediate reaction during progression and can be installed into the special routing points on the chest parts of the Tree Access SRT Chest and Tree Access ANSI XT harnesses, or it can be rigged to any tree climbing harness. WARNING: the Turboknee System is a climbing aid device…
-
SPHINX – Pulley
An ultra slim, highly functional fixed pulley. The main attachment point allows for full rotation of the carabiner. For use with ropes up to 13 mm. Prusik minding, the self-locking knot can be installed on one side. Self-lubricated bushings are sufficient for light applications at low speed. Efficiency: 80%. Aluminum alloy body and wheel, stainless steel axle.