รอกพกพาแบบล็อคอัตโนมัติ Turbolock
ACTIVITIES
| Ref. | Product name | Weight | Inner sheave diameter | Rope diameter Min | Rope diameter Max | Working load Max | Breaking load | Ball bearings | Sheave material |  |
|
|
 |
||||
| g | oz | mm | mm | mm | kN | LBF | kN | LBF | EN 12278 | EN 567 | EN 12841/B | ||||||
| 3185 | TURBOLOCK | 198 | 7.0 | 41 | 8 | 13 | 2.5 kN x 2 = 5 kN | 562 LBF x 2 = 1124 LBF | 23 | 5620 | • | Aluminum alloy | • | • | • | • | |
The Turbolock is a progress capture pulley designed to be exceptionally compact, robust and efficient.
Specifically contoured for operation with one hand. The locking mechanism for opening and closing allows the rope to be inserted without removing the device from the anchor and it cannot be opened when the pulley is loaded to prevent accidental openings during use.
Toothed cam is designed for an immediate and strong grab on ropes from 8 to 13 mm.
The cam is enabled and disabled with a switch that is protected inside the flanges to prevent accidental activations. One movement to open the cam for easier insertion or removal of the rope or to use the device as a non-locking simple pulley. Two movements to enable the cam.
The two attachment points (main attachment point and the becket hole) allow for the rotation of carabiners for maximum ease of use.
Large diameter sheave with sealed ball bearings for very high efficiency (95%).
Robust construction features hot forged side plates, precision milled aluminum alloy sheave, and stainless steel cam, rivets and pins.
Related Products
-
WING 2 – Pulley
Unique closure for increased safety Guards serve a dual purpose by keeping clothing and hair away from the wheels and carrying backup lines Sealed steel ball bearings Stainless steel sheaves Maximum speed: 20 m/sec, 45 mph
-
TURBOFOOT – Foot ascender
Proprietary rollers increase climbing efficiency and decrease wear and tear on the device and ropes Innovative straps provide a secure and ergonomic fit on boots Can be rigged as a locking pulley for light hauling (max load 50 kg, 110 lbs) For ropes from 8 to 13 mm Available in right and left versions
-
SOLO 2 – Rope clamp
A hyperlight compact ascender with an ergonomic design that makes it very easy to use. Perfect for ascension, verified for traversing, and can also be used in block-and-tackle systems. The lower hole is shaped for optimal positioning of the carabiner while the upper hole fits a safety carabiner to secure the rope. The toothed cam is finished with a special anti-wear treatment and features drain holes to help prevent the build up of mud and grit. The opening mechanism is simple and secure with the ability to lock the device open for easier attachment and a removable pull cord that…
-
TURBOCHEST – Chest ascender
A revolutionary chest ascender that features two proprietary rollers for a smooth interface with the rope. This not only helps with climbing efficiency by making the upward glide much smoother. It also reduces dangerous wear on the device where the rope tends to rub on the body of a traditional ascender. The perfectly profiled closure keeps the rope in line with the body of the device and the rollers to prevent the rope from escaping the device during tight pendulums and traverses. The toothed cam is finished with a special anti-wear treatment and features drain holes to help prevent the…